Ice & Fire Created by: AnimaTek, Moscow (c) Published by: Zombie Virtual Reality Entertainment(c) Distributed by: GT Interactive Software(c) September 28, 1995 Installation 1. Insert the Ice & Fire CD-ROM into the drive. 2. The Ice & Fire CD-ROM icon should pop up on the desktop. 3. Double click on the Ice & Fire CD-ROM icon. 4. Follow the instructions and drag the Ice & Fire folder onto your hard drive icon. Ice & Fire will now be installed onto your hard drive. 5. Double click on your hard drive icon. Look for the Ice & Fire folder. 6. Double click on the Ice & Fire folder. 7. Double click on the Ice & Fire icon to start the game. System Requirements MacOS 7.0 or higher Power Macintosh (able to run on mc68k, but not advised) 8 MB machine (with 16 MB of Virtual Memory), 16 MB strongly recommended 10 MB hard disk space Ice & Fire installation troubleshooting tips Q1: Why doesn't the Ice & Fire CD icon appear on the Desktop after inserting the CD into the CD-ROM drive? Q2: While copying the 'Ice & Fire' folder onto the hard drive, a message appears stating a reading error. A: It could either be because of your CD-ROM drive or your Ice & Fire CD may be damaged. Try cleaning your CD drive and be sure that your Ice & Fire CD is clean and has no scratches or any sign of damage. Q3: What do I do if I don't have enough space on my hard drive? A: You may run the 'I & F' application off the CD, but you will not be able to save any settings and the game loading will be very slow. You may also turn on Virtual Memory or turn off any unnecessary extensions. See Q2 under Frequent Questions. Place the CD into your CD-ROM drive. Open 'Ice&Fire CD' volume. Drag 'Ice&Fire' folder onto your hard drive. To run Ice & Fire, double click on the IF icon in the copied 'Ice&Fire' folder. Frequent Questions Q1: How do I bypass the fly-through and get to the mazes? A: The fly-through is very challenging and some first time usersmay wish to bypass it. Because of this you can push the 'esc' key at any time to get to the next maze. You can only do this, however, for mazes 1-5, not mazes 5-8 (those you have to find on your own!). Also, to understand the fly-through, study the way the lines meet each other. Sharp turns and obtuse angles usually don't connect, whereas smooth curves usually do. Q2: Why is the maze part of the game slow on my computer? A1: Make sure you have turned on Virtual memory if you have less than 8 MB of free RAM. Go to the Apple Menu and scroll down to Control Panels. Under Control Panels go to Memory. Under Virtual Memory click 'on' and make sure you have at least 16 MB of Virtual Memory. Then restart your computer. Once you are done playing Ice & Fire, be sure to turn off Virtual Memory and restart your machine. A2: Try turning off unnecessary extensions. Extensions you MUST have to run Ice & Fire are: Apple CD-ROM/ QuickTime/ QuickTime PowerPlug/ Memory/ Mouse/Sound Displays/QuickTime Musical Instruments. A3: Check your keyboard rate. MacOS controls the speed of your keyboard. Go to the Keyboard Control Panel and set: - 'Key Repeat Rate' to Fast - 'Delay Until Repeat' to Short A4: Try to change the action window size by using the 'Z' key. We have three resolutions in the game: Small, Medium and Full Screen. Using the smallest window should improve the game speed. A5: If the game is still too slow, try turning off the music. This will speed up the game. Q3: Why is the Fly-through part of the game slow with occasional interruptions and delays? A: Check the above answers. Also, if you have a slow CD-ROM drive, it may be time to consider an upgrade. Another reason may be that your drive isn't reading the CD properly. If this happens the drive will stop and try to reread the information again and again. This will cause delays and stops. Try cleaning the CD and your CD-ROM drive. Q4: Why is my Joystick (or MouseStick) not operating correctly with Ice & Fire? A: Your Joystick (or MouseStick) must be calibrated before playing the game. Use the software that comes with your Joystick to calibrate it first. After that, you should have no problems playing Ice & Fire with your joystick. Q5: Why do I sometimes see error messages during the game? A: It could either be because of your CD-ROM drive or your Ice & Fire CD may be damaged. If your CD doesn't read the game CD properly, you may get an error stating that it could not find a file. Try cleaning your CD drive, and be sure that your Ice & Fire CD is clean and has no scratches or any sign of damage. Game Play An attack by an alien race forces the commander of Asteroid IF-1 to freeze everything on the asteroid- humans aliens, secrets! Now you have been selected as the frozen survivors only hope... In Ice & Fire you are able to decide the course of action - fast paced shoot them up or a more methodical game of exploration and elimination. The game consists of two parts. In the first part, the fly-through, you can explore the mystical terrain of the asteroid. CONTROLS in the maze A - ice blaster shot S - fire blaster shot Ctrl-A - ice missile/burst Ctrl-S - fire missile/burst Ctrl- - jump Ctrl-- shift to the left Ctrl-- shift to the right Cmd-Q - exit ESC - skip movie Z - zoom-toggle ,PgUp, PgDn - select objects from the pocket - Activate the current object TAB - map toggle P - game pause toggle H - call soldiers for help E - Explode the Fire bomb The mouse controls work only in the maze. To move forward, place the mouse above the center crosshairs and press the left button. This will move you forward. Likewise, placing the mouse below the cross hairs moves you in reverse. The farther away from the center crosshairs, the faster you move. To move left or right, move the mouse to the left or right side of the screen (while pressing mouse button). CONTROLS in the Cruiser Space bar - fire missile Arrow keys - motion control and turns Z - zoom-toggle Cmd-Q - exit P - game pause toggle Tab - map toggle I&F Credits Game concept by V.Pokhilko & A.Pajitnov Directed by V.Pokhilko & A.Pajitnov Producer: K. Collmer Project manager: D. Sokolov Executive director: D.Tolkatchev Art direction: M. Meshkov, K. Collmer, S. Smith Animation direction: V. Kolesnicova Rendering engine: Yuri Syrov Macintosh Porting: Yuri Syrov C-buffered movie technology: G.Naryshkin, M.Tsoupko-Sitnikov Compression engine Smacker by RAD Software (Mac 68k/PPC port by Yuri Syrov) Main Programmers: D.Sokolov, A.Blinov, A.Galkin, V.Tourtchenko Yuri Syrov System Support A. Strakhov Programming Help: G.Polevoy, A. Strakhov D.Tolstov, R.Ponomarev, Y.Gorvitovsky Artists: M.Meshkov, A.Kiselev, V.Sotskov, T.Iudin, V.Likhatchev , A.Kokina A.Kolomytsev, M.Skoblina D.Oserov, O.Ivanov D.Trofimov, J. Danielson also Kathy Buchheit, Guy Hundere, After Science/ Anne Graham Imagination Works Tom and Helene Knight Music: Roland Barker, Composer Y. Dicoushin, Programmer Sound Effects: Roland Barker, Y.Dicoushin Game Intro. movie: Televita I. Barbe A. Foht-Babushkin A. Zonin P. Chitashvilli Fog Studios Game Text: Fog Studios/Ed Dille P. Alau, K. Collmer QA: Peter Alau Testers: Michael Madden, Dan Mueller Mike Mansourian, Stefan M. Nelson Special thanks Mark Long, Joanna Alexander, George Noceti, Dennis Streveler, Allan Blum, Technology Solutions, rem graphic design/Lisa Liedgren, Janet Galore, Max Kelman. Final Notes Ice & Fire currently runs for PowerMac under MacOS 7.0 and higher and QuickTime 2.0. You can run it for Mac Quadra, but it isn't recommended for appropriate game experience. Virtual i-O users will note that currently, Ice&Fire does not support the Virtual i-O headsets. At release time, the Virtual i-O system did not run with MacOS. This is currently being developed, and will be released at a later time. Please call Virtual i-O customer support at 1-800-646-3759 for more information on upgrades, or visit the Zombie website at http://www.zombie.com or the Virtual i-O website at info@vio.com. Also it runs under Windows 3.1 and Windows 95. Also Ice & Fire will be released for Sony Playstation in Spring of 1996. Enjoy Playing, Have fun.